Fusion™ CLEAR TOUGH COAT Matte Wipe-on Poly
or make 4 interest-free payments of $3.25 AUD fortnightly with More info
Perfect for those high traffic surfaces such as table tops, our non-yellowing water-based wipe on sealer, easily applied with a damp lint free cloth and dries to a matte finish. Recommeded over light colours. For darker colours, Natural/Clear Stain & Finishing Oil is recommended.
500ml covers about 75 sq.ft (7m2).
Clean up is easy with soap and warm water.
How to use:
Ensure the Poly is well mixed prior to use, but do not shake. If applying to a recently painted surface, allow 12-24 hours of drying time before applying. For best results, use with a damp lint free rag and apply two coats 2-4 hours apart. In humid areas, longer drying times may be required.
Good to know:
500ml covers about 75 sq.ft (7m2). Always test your methods and process to ensure best results. Clean up is easy with soap and warm water.
Be sure to gently mix your Tough Coat™ prior to using it as the matting agent and other ingredients may settle to the bottom.
Do not shake vigorously as this will cause air bubbles in your piece that are difficult to remove once applied.